Reboot, and now blue flashing light with NO HDD. Unpack firmware root and lib to same folder. Uploaded the 4.XX firmware root files, lib, config, uImage, and Ramdisk. Create the raid arrays for md0/1/2 using sda and missing. Wipe/reconfig both disks as sda1/2/3 and sdb1/2/3. Looks like Linux but that’s what it was running anyways. My MAC must have changed as it has a new IP, no biggie, but I could telnet to the device. Unfortunately, mauled with the red/purple lights. I uploaded the Debian firmware file and rebooted. So, I have an EX2 Dual Bay with 4TB drives (same as Mirror Gen 1).
After a reboot ist still the same kernel version It runs smooth but i got some Errors and cant apply changes in some Paketes like Firewall, NTP or Email notifications.ĭo i need to install some extra programms to make it run properly ?Īnd is there a way to upgrade the kernel ? If i try it with : For change it: /etc/network/interfaces (hwaddr value) Passwd: mycloud MAC address will changed to real after next boot. Reboot -f After reboot you can connect via SSH: Rm uImage uRamdisk libs-4.15. /mnt/root/lib/modules/4.14.4 -r Reboot device Mount /dev/md1 /mnt/root Upload rootfs archive to this partition and unpack: Mkfs.ext4 /dev/md2 Mount partitions and upload rootfs (Already included kernel): Mdadm -manage /dev/md2 -add /dev/sdb3 Format new partitions: Mdadm -create /dev/md2 -level=1 -raid-devices=2 -run /dev/sda3 missing For add 2nd disk later Format disk and run this: Mdadm -create /dev/md1 -level=1 -raid-devices=2 -run /dev/sda2 missing Mdadm -create /dev/md0 -level=1 -raid-devices=2 -run /dev/sda1 missing Set 3 raid on” Replace “Missing” to /dev/sdb* for use bith disks. After reboot - device get new IP address, find it and connect via Telnetĭisk 1: /dev/sda, Disk 2: /dev/sdb Run it for both disks if you need raid and replace “missing” in mdadm command to 2nd disk (/dev/sdb).Hey guys, i want to install OMV5 on my ex2ultra.
0 kommentar(er)
